Connect with us


Discussion in 'Electronic Repair' started by Josue Hernandez, Aug 31, 2004.

  1. Hi, I'm a student at Heald College and I'm working in a project for my
    graduation and I was wondering is anyone has a schematic of a
    electronic banner?

  2. I would have thought that the idea of a senior project is to actually
    design something, not just copy a schematic. How about giving us your
    thoughts on how one would be designed? :) If I understand what you
    mean by an "electronic banner", it's not exactly a very complex system.
    If you've had semidecent courses in logic design and computer organization,
    should be well within your capabilities.

    Don't forget that your advisor could very well monitor these newsgroups
    as well!

    --- sam | Sci.Electronics.Repair FAQ Mirror:
    Repair | Main Table of Contents:
    +Lasers | Sam's Laser FAQ:
    | Mirror Sites:

    Note: These links are hopefully temporary until we can sort out the excessive
    traffic on

    Important: Anything sent to the email address in the message header is ignored.
    To contact me, please use the feedback form on the S.E.R FAQ Web sites.
  3. Jan Pedersen

    Jan Pedersen Guest

    Don't forget that your advisor could very well monitor these newsgroups
    Whats the problem ? He has to explain what he has constructed and thereby
    show his knowledge... the schematics in itself do not present any serious
    All Engineers gets inspired by looking at schematics constructed by
    others....the knowledge is found in converting theese schematics to ones own
    needs :)
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day