Connect with us

Schematics needed for NEC Multisync 95

Discussion in 'Electronic Repair' started by Daniel L. Belton, Nov 5, 2003.

Scroll to continue with content
  1. I need to know of a source for schematics for a NEC Multisync 95, hopefully
    at a low cost.

    Thanks
    Daniel Belton
     
  2. No prints....what's the problem with it?


    --
    ==========================
    Jeff Stielau
    Shoreline Electronics Repair
    344 East Main Street
    Clinton,CT 06413
    860-399-1861
    860-664-3535 (fax)

    ========================
    "If you push something hard enough it will fall over."
    Fudd's First Law of Opposition - Sir Sidney Fudd
     


  3. It has a problem with the vertical sync. The upper 1/4 of the screen won't
    sync. Other than that, everything else is great.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-