Connect with us

Schematic help needed

Discussion in 'Electronic Repair' started by Golf, Aug 25, 2007.

Scroll to continue with content
  1. Golf

    Golf Guest

    Before trying Pioneer, I am hoping someone in this group may have a
    schematic for a Pioneer model PRO97. Set is going into shutdown, but
    can be made to stay powered up by removing the Vert Ret wire from the
    convergence board. Already replaced the STK-4274, no change. I'm not
    sure of this wire's function, but a schematic would help me
    trenmendously. Thanks group.
     
  2. Email me privately and remind me to check when I get tothe shop on Monday.
    I am pretty sure that I have the service manual and I can scan part of the
    schematic for you. Pioneer manuals are ridiculous.

    use my first name AT electronics DASH world DOT net
     
  3. justmanuals

    justmanuals Guest

    http://www.justmanuals.com
     
  4. Golf

    Golf Guest

    Thankyou for the offering Leonard. I went to work on this set the day
    after the post, got fed up and googled again for it. Found the service
    manual for $25.00 and bought it. Probably should have checked my post
    first, but previous post didn't draw a bite. Should have did this
    weeks ago since I think I already know what's wrong with the set after
    looking over the schematics. I will post a follow up once repaired.
    Thanks again.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-