Schematic for Sorensen PTM 15-3.5 linear power supply

[Samuel M. Goldwasser]

I know, real engineers and techs don't need schematics, but it
would make this a lot easier.

It's a linear power supply with OVP and the OVP isn't working. Now, that
sounds pretty simple - a pot and zener and SCR. But it's not quite that
simple and it may be that someone (like me) repaired this many years ago and
didn't put correct parts in. In fact, that may be the only problem!

Google finds a manual for the dual version, but they are sufficiently
different as to make that less than entirely useful. And this model
is not listed on the Elgar/Sorensen Web site.

Thanks!

--
sam | Sci.Electronics.Repair FAQ: http://www.repairfaq.org/
Repair | Main Table of Contents: http://www.repairfaq.org/REPAIR/
+Lasers | Sam's Laser FAQ: http://www.repairfaq.org/sam/lasersam.htm
| Mirror Sites: http://www.repairfaq.org/REPAIR/F_mirror.html

Important: Anything sent to the email address in the message header above is
ignored unless my full name AND either lasers or electronics is included in the
subject line. Or, you can contact me via the Feedback Form in the FAQs.