Connect with us

schematic for ramsey msc1c, anyone?

Discussion in 'Datasheets, Manuals and Component Identification' started by 600f4i, Feb 14, 2012.

Scroll to continue with content
  1. 600f4i

    600f4i

    5
    0
    Feb 14, 2012
    http://www.ramseyelectronics.com/cgi-bin/commerce.exe?preadd=action&key=MSC1C
    I am on a hunt for a schematic showing how to assemble the msc1c motor controller by ramsey. I have done a good bit of google searching and I have not found a schematic. I have all of the parts necessary, I just don't know how connect it all which is the tricky part. Do you have the schematic for this kit? do you know where I can go view it?

    NOTE: I only want a picture of the schematic for this project, no directions, no extra dialog, just a simple image of the schematic.
     
    Last edited: Feb 14, 2012
  2. (*steve*)

    (*steve*) ¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd Moderator

    25,418
    2,788
    Jan 21, 2010
    figure 2 in the manual on the page you point us to.
     
  3. 600f4i

    600f4i

    5
    0
    Feb 14, 2012
    what manual are you looking at? the second page of the manual I see on the website is simply explaining the other kits that are available by the manufacturer.
     
  4. (*steve*)

    (*steve*) ¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd Moderator

    25,418
    2,788
    Jan 21, 2010
    Sorry, can't provide discussion or directions. Not allowed. You said. Done too much already.

    Buy a kit and get the schematic -- I thought you wanted to know how to connect it to a motor.
     
  5. 600f4i

    600f4i

    5
    0
    Feb 14, 2012
    well I'm just trying to find a schematic for the kit, I have all of the parts to build the kit, I just need the plans on how to assemble the thing, isn't this forum for swapping schematics?
     
  6. (*steve*)

    (*steve*) ¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd Moderator

    25,418
    2,788
    Jan 21, 2010
    I can do no more than point you to the manual that I mentioned in my first post.

    It has a PCB layout, from that (and knowing the parts) you can determine a schematic.
     
  7. 600f4i

    600f4i

    5
    0
    Feb 14, 2012
    reading the manual is how i know I have all of the parts, thanks tho.
     
  8. (*steve*)

    (*steve*) ¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd Moderator

    25,418
    2,788
    Jan 21, 2010
    In that case, you have all you need (aside maybe for the datasheets of the IC(s)).

    Or just copy the PCB and dispense with having a schematic at all.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads
There are no similar threads yet.
Loading...
Electronics Point Logo
Continue to site
Quote of the day

-