Connect with us

Schematic drawing utilities

Discussion in 'Project Construction Technologies' started by techforce, Sep 22, 2019.

Scroll to continue with content
  1. techforce


    Dec 26, 2008
    With most electronics being disposable and non repairable, I find myself needing to reverse engineer more lately. Looking for some good resources that are free and allow you to draw decent schematics
    with a selection of pre-dfeined components, or other neat features. I was recommended Kicad
    and it seems to do alot, but its hard to get the hang of and a little awkward. Anyone have good results with any others?
  2. Minder


    Apr 24, 2015
    There are many tutorials, PDF, Utube etc for KiCad also the KiCad forum if needed.
    There is a bit of a learning curve, but worth it IMO if you stick with it.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads
There are no similar threads yet.
Electronics Point Logo
Continue to site
Quote of the day