Connect with us

Scantronics Installation Guide

Discussion in 'Security Alarms' started by Tony, Nov 18, 2003.

Scroll to continue with content
  1. Tony

    Tony Guest

    Does anyone have an Installation Guide for the scantronics 9448 alarm
    system they can send me?

    The problem is, a friend has moved into a house already fitted with
    the above alarm but it's got a tamper fault on it (she has the code
    for the alarm - original owner provided it)

    I've had a look at the alarm but I can't trace the fault. All the
    PIR's are wired correct with what looks like the correct 24hour loop

    My problem is that she wants it to work now but as I've been out of
    the 'installation scene' for over ten years now I'm a bit rusty.

    If I had the giude I could trace the problem and reset the system (I'm
    talking a complete reset with more items added to it)

    BIG NIGE Guest

    First of all re-solder the two fuse carriers this is a common fault (causes
    tamper/pa alarms)(dependant on whether set or not)

    to link out siren tamper link 0v to tr
    to link out global tamper link across the two A/T connections

    apart from the fuse carriers the fault is very unlikely to be in the panel
    (usually siren tamper)

    i will watch the thread in case you have any other questions.

    BIG NIGE Guest

    you can d/l a USER manual at this url -- the panel is very basic and you
    will be able to carry out most tests from customer mode.

    ps also sometimes the panel tamper switch benefits from a spray with
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day