Connect with us

Sansui 5000A Output Transistors

Discussion in 'Electronic Repair' started by LOP, Jan 10, 2010.

Scroll to continue with content
  1. LOP

    LOP Guest

    Were the original output transistors in this receiver 2SD118? The receiver I
    am working on has a mixture of two 2SD118, one NTE118 and one NTE284. (all

    Thanks, Don and Liz
  2. LOP

    LOP Guest

    Whoops! Yes you are right. NTE181. Thanks for the help.
  3. David Farber

    David Farber Guest

    Yes, the 2SD118 transistors are the correct originals. Fair warning though
    that these things were a common failure if you didn't replace the driver
    board as well. If your driver board doesn't say F-6013, then you have the
    older type which was unstable.

    Good luck.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day