Connect with us

Safewatch Pro 2000

Discussion in 'Security Alarms' started by Dave S, Sep 30, 2008.

Scroll to continue with content
  1. Dave S

    Dave S Guest

    Dave S had written this in response to
    http://www.secure-gear.com/alt.security.alarms/5/-article-.htm :

    Goldendomers
    -------------------------------------

    I have an ADT Safewatch pro 2000 installed when I built my house in 1999.
    I purchased the equipment. After 2 year I stopped the monitoring. I had
    two magnetic sensors go bad. I have been able to replace one and I would
    like to by-pass the second one for now.

    When I look at the keypad all zones are functioning except the one bad
    zone. When I by-pass that zone and set the alarm several areas when I
    test will not set the alarm off. I.e. when I open a window or door.

    Out of 8 Zones I would say 3 seem to be functioning properly.

    Any ideas what may be wrong??



    ##-----------------------------------------------##
    Delivered via http://www.secure-gear.com
    The Internet Knowledge Base for the security industry
    no-spam access to your favorite newsgroup -
    alt.security.alarms - 43410 messages and counting!
    ##-----------------------------------------------##
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-