Connect with us

S video to component video

Discussion in 'Beginner Electronics' started by ED ROGERS, Dec 5, 2004.

Scroll to continue with content
  1. ED ROGERS

    ED ROGERS Guest

    How do you wire S video to component video outputs?Does the audio ride
    these same paths?
     
  2. Chris

    Chris Guest

    -----BEGIN PGP SIGNED MESSAGE-----
    Hash: SHA1

    Hi,
    It's not just about "wiring" it properly. First off, to answer your
    second question, audio is not part of S-video or component video;
    it's carried separately. Second, to answer your first question, if
    I'm not mistaken, this is what modern TVs used "comb filters" for,
    which, I'm pretty sure, are very complicated devices. There are
    probably converters out there, but it'd be a big undertaking to build
    one yourself.

    Chris
    -----BEGIN PGP SIGNATURE-----
    Version: GnuPG v1.2.6 (GNU/Linux)

    iD8DBQFBsrMfgxSrXuMbw1YRAnCuAJ451kVvLW7Ylz8Kaq1MsZzNpgYM/wCfZPTo
    A/QvF2DVtzWjflcOEYTFsP8=
    =JdLl
    -----END PGP SIGNATURE-----
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-