J
Joerg Hau
- Jan 1, 1970
- 0
Hi,
I'm looking for a copy of the schematic or the service manual for a
power supply "Maxireg 761", manufactured by Weir Electronics. I have
such a unit which is pretty functional, but it could need some minor
readjustments.
[My previous msg said it was a "671" - sorry for the error.]
Second question to the same supply, what is the primary fuse's rating
as given by the manufacturer? I got this unit with a 3.15A fuse
installed, which is IMHO pretty much for a 60 W supply - I'd rather
go for something like 0.5A ...
Please feel free to contact me either via the newsgroup, or per direct
mail.
Cheers,
- Joerg
--
joerg dot hau at swissonline dot ch * Lausanne, Switzerland
http://homepage.sunrise.ch/mysunrise/joerg.hau/
"All standard disclaimers apply".
remove "nospam." from my address to reply
(this became necessary due to increasing SPAM)
I'm looking for a copy of the schematic or the service manual for a
power supply "Maxireg 761", manufactured by Weir Electronics. I have
such a unit which is pretty functional, but it could need some minor
readjustments.
[My previous msg said it was a "671" - sorry for the error.]
Second question to the same supply, what is the primary fuse's rating
as given by the manufacturer? I got this unit with a 3.15A fuse
installed, which is IMHO pretty much for a 60 W supply - I'd rather
go for something like 0.5A ...
Please feel free to contact me either via the newsgroup, or per direct
mail.
Cheers,
- Joerg
--
joerg dot hau at swissonline dot ch * Lausanne, Switzerland
http://homepage.sunrise.ch/mysunrise/joerg.hau/
"All standard disclaimers apply".
remove "nospam." from my address to reply
(this became necessary due to increasing SPAM)
