Maker Pro
Maker Pro

S-R latch

S

sophia

Jan 1, 1970
0
Hi ,

the following is the implementation of S-R latch which i saw in a
book,

http://i297.photobucket.com/albums/mm220/sophiaagnes/Scan3.jpg

and the following is the truth table based on it
http://i297.photobucket.com/albums/mm220/sophiaagnes/scan2.jpg


now in the book it is written that when both s & R are made high
simultaneously both the o/p will be low
and the value of Q is unpredictable (1 or 0) depending on the
circuit condition

now my question is what is this circuit condition that Q depends on ?
 

neon

Oct 21, 2006
1,325
Joined
Oct 21, 2006
Messages
1,325
i
sophia said:
Hi ,

the following is the implementation of S-R latch which i saw in a
book,

http://i297.photobucket.com/albums/mm220/sophiaagnes/Scan3.jpg

and the following is the truth table based on it
http://i297.photobucket.com/albums/mm220/sophiaagnes/scan2.jpg


now in the book it is written that when both s & R are made high
simultaneously both the o/p will be low
and the value of Q is unpredictable (1 or 0) depending on the
circuit condition

now my question is what is this circuit condition that Q depends on ?
I think you s/r means set reset yes in that case there maybe a change or not.
 
Top