Connect with us

roland XP50 audio static

Discussion in 'Troubleshooting and Repair' started by blackcobra777, Dec 13, 2020.

Scroll to continue with content
  1. blackcobra777


    Dec 13, 2020
    Roland XP -50 audio static. I have replaced battery and return to factory default setup. On powerup no error messages and display is good and bright. But very loud static and low output volume.
    Confirmed good working connecting cord, foot pedal and amplifier. Amplifier connect with standard 1/4" cable through the Mono input. No audio at all when using head phone input and stereo headphones.
    Others suggested re capping board but never mentioned loud static in audio output only low volume and display fixes.

    Can you help?
    Last edited by a moderator: Dec 13, 2020
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day