Connect with us

RJ11 cimper end pins dont go in

Discussion in 'Electronic Repair' started by [email protected], Aug 1, 2013.

Scroll to continue with content
  1. Guest

    THe middle 4 go in but one on each end doesn't.

    I can't figure out if there's a way to change the head.

    I think I've had this problem before and had a workaround but
    can't recall

    Why not essentially make an awl/screwdriver type push down tool that also
    takes up less space?


    - = -
    Vasos Panagiotopoulos, Columbia'81+, Reagan, Mozart, Pindus, BioStrategist
    http://www.panix.com/~vjp2/vasos.htm
    ---{Nothing herein constitutes advice. Everything fully disclaimed.}---
    [Homeland Security means private firearms not lazy obstructive guards]
    [Urb sprawl confounds terror] [Phooey on GUI: Windows for subprime Bimbos]
     
  2. Guest

    It's an RJ11 "plier" crimper. Seems designed for four pins.

    White plastic. THe handle has some sort of template for smaller connectors

    Maybe my old workaround was to get connectors with only 4 pins?

    - = -
    Vasos Panagiotopoulos, Columbia'81+, Reagan, Mozart, Pindus, BioStrategist
    http://www.panix.com/~vjp2/vasos.htm
    ---{Nothing herein constitutes advice. Everything fully disclaimed.}---
    [Homeland Security means private firearms not lazy obstructive guards]
    [Urb sprawl confounds terror] [Phooey on GUI: Windows for subprime Bimbos]
     
  3. There are several kinds of plugs. They are listed by the number of pins
    and places for pins.

    The small ones for headphones are called 4P4C (4 pins, 4 connectors).

    The usual ones, also called RJ-11 are 4P6C, 4 pins, 6 connectors. The
    center 4 are used, the outer 2 are not. This is the standard for telephone
    lines as the center 2 are tip and ring, and the next 2 out (one one
    each side) are tip and ring for a second phone line, or a third wire for
    ringer, and a fourth for ground, and in the 1960's low voltage AC
    for dial lights (back when they were bulbs).

    The next step up is the 6P6C, where all 6 connectors in the plug are
    filled. They are rare and are not normally used for telephones, so it
    it possible that you have a 4P6C crimper and are trying to crimp
    6P6C plugs in it.

    From my experience the cheap white crimp tools sold in home repair
    stores etc, are not very good and require a steady but slow hand or you
    will squeeze too hard and break them.

    Geoff.
     
  4. Guest

    *+-it possible that you have a 4P6C crimper and are trying to crimp
    *+-6P6C plugs in it.

    Unfortunately I suspect same. Much obliged, though.



    - = -
    Vasos Panagiotopoulos, Columbia'81+, Reagan, Mozart, Pindus, BioStrategist
    http://www.panix.com/~vjp2/vasos.htm
    ---{Nothing herein constitutes advice. Everything fully disclaimed.}---
    [Homeland Security means private firearms not lazy obstructive guards]
    [Urb sprawl confounds terror] [Phooey on GUI: Windows for subprime Bimbos]
     
  5. Kalyan Ram

    Kalyan Ram Guest

    ://www.web-design-hyderabad.in/seo-course-in-neredmet/


    Contact for advisor : +91 9177522892

    Web Design Hyderabad has a great demand and much more competition, But manyof companies are not able to provide good service for customers, The problem might be because of design quality, not providing dynamic works like contact form or may be client expecting more work with very low cost.

    To work with Web Design in Hyderabad, A designer should more honest with the client, you have to be explain the work of cost exactly, If not a designer will be struggled one day with client, Every one knows a designer can doany work but it takes time right, We have to cost as per our time

    web design companies in hyderabad

    Web design history

    The Hypertext concept was invented by Ted Nelson in 60s, however it was used only for some decades after. During 1992 to 1994 other developers startedadding up their own bits of HTML codes. HTML 1 tags and the HTML 2 born. As internet faster now the Web designers are putting more HTML capabilities.In 1995 more HTML tags have appeared and HTMl 3 was born. Now designers have an lot of option to use HTML B tables and style sheets and many more. They also have animated images, and Flash also introduced. It changed the whole landscape of web design from static to dynamic.

    The first web site published in the World Wide Web history at sometime in August of 1981. It was some 30 years ago, however the Internet born in the sixties. It wasn’t fast as today. However it was capable in transferring information from one computer to another. Tim Berners was the first person who invented the World Wide Web. Tim Berners is British computer scientist. The First website launched in year 1990. on December 25 1990 with the help of Robert Cailliau and young student at CERN, Tim Berners implemented firstsuccessful communication between a Hypertext Transfer Protocol (HTTP) patron and server via Internet.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-