Right Angle 22 way 2 side Edge Connector PCB mount

[[email protected]]

Hi Group

I have four 22 way 2 side edge connector (0.156 inch pitch) into which
I mount cards used to control my model trains. The edge connectors I
have are the ones with eyelets for cables to be soldered in. These
have worked perfectly for me during testing and development.

I now wish to make a PCB board onto which permanently mount the edge
connectors.

I am trying to track down a supplier of 22 way 2 side edge connectors.
I would prefer the PCB mounts that allow the mounting of the card
horizontal (requiring a right angle edge card connector to the PCB).

Does any one know of a vendor of such components.

Thanks

Stuart

 

[Peter Bennett]

Hi Group

I have four 22 way 2 side edge connector (0.156 inch pitch) into which
I mount cards used to control my model trains. The edge connectors I
have are the ones with eyelets for cables to be soldered in. These
have worked perfectly for me during testing and development.

I now wish to make a PCB board onto which permanently mount the edge
connectors.

I am trying to track down a supplier of 22 way 2 side edge connectors.
I would prefer the PCB mounts that allow the mounting of the card
horizontal (requiring a right angle edge card connector to the PCB).

Does any one know of a vendor of such components.

EDAC (http://www.edac.net/) manufactures card edge connectors. Their
products are available from NewarkInOne, Mouser, and other
distributors.


--
Peter Bennett, VE7CEI
peterbb4 (at) interchange.ubc.ca
new newsgroup users info : http://vancouver-webpages.com/nnq
GPS and NMEA info: http://vancouver-webpages.com/peter
Vancouver Power Squadron: http://vancouver.powersquadron.ca