Maker Pro
Maker Pro

Ride on Mower electrics

  • Thread starter Michael Mackay-Blair
  • Start date
M

Michael Mackay-Blair

Jan 1, 1970
0
Here is a good one for you.... Does anyone have a Cct Dia for a Bolens 13HLT
fitted with a Briggs and Straton 3800333 engine.

My dog a puppy Bordercollie/keplie cross decided the wiring would be a good
food source. I have rewired the obvious ones but still have some others that
make no sense. I can get the mower started but the only way to turn it off
is to open the choke and shut the throttle. It appears that the isolation
cct for the spark plug is not in cct. Any hints ( apart from shooting the
dog).

I am thinking of changing the dogs name to sparky ( I said it before anyone
else did)

TIA Michael
 
J

John_H

Jan 1, 1970
0
Michael said:
I am thinking of changing the dogs name to sparky ( I said it before anyone
else did)

We call ours Engineer....
Kick him in the nuts and you're never quite sure whether he'll make a
bolt for the door or a race for your balls. :)
 
M

Michael Mackay-Blair

Jan 1, 1970
0
aussieblu you ARE A LEGEND!!! well I thinks.....my dog dosnt however!

Michael
 
M

Michael Mackay-Blair

Jan 1, 1970
0
I have already dl'ed the BS parts list and service manual but it didnt show
what I wanted.

Thanks anyway
 
J

J

Jan 1, 1970
0
Magneto job? If so, the kill switch is normally a shorting switch across a
tap on the coil creating a "shorted turn" to kill the engine.

Battery job? Conventional Kettering ignition uses a series ignition switch
to remove battery power from the coil/points.
 
M

Michael Mackay-Blair

Jan 1, 1970
0
And I think my dawg has prob eaten that part of the cct then....as in
battery
 
Top