Maker Pro
Maker Pro

RGsB signal

valdimarjb

Jan 12, 2013
1
Joined
Jan 12, 2013
Messages
1
Hi
I have a problem with a PLC Monitor. The old Monitor (20 years old) is useless and I wanted to be able to connect a LCD monitor. But the signal from PLC is an RGsB and FH is 17kHz and FV is 50 kHz. I've tried many different monitor and screens but no one recognizes the FH signal. Also, I've tried some convertors but always get "Not VGA" which is of course correct.
Doe's anyone of you know of a convertor that could work for this signal or some way to change the frequency?
Thanks in advance
Valdimar
 
Top