Maker Pro
Maker Pro

rfq: reel to reel etching capability

  • Thread starter William Danielson
  • Start date
W

William Danielson

Jan 1, 1970
0
I am looking for a US company that has reel-to-reel etching capability
for very high volume production. The part is actually a clad material
comprised of stainless steel and copper. The stainless steel
thickness is .0005" and the copper thickness is .004. The part is
approximately 1 inch x ½ inch. In addition there are some tight
tolerances on some features. The clad material could be supplied in
any width to fit the machinery.

Thanks,

Doug Danielson
Atlanta, GA




rfq: reel to reel etching capability






,
 
Top