Connect with us

rfq: reel to reel etching capability

Discussion in 'Electronic Design' started by William Danielson, Jul 8, 2003.

Scroll to continue with content
  1. I am looking for a US company that has reel-to-reel etching capability
    for very high volume production. The part is actually a clad material
    comprised of stainless steel and copper. The stainless steel
    thickness is .0005" and the copper thickness is .004. The part is
    approximately 1 inch x ½ inch. In addition there are some tight
    tolerances on some features. The clad material could be supplied in
    any width to fit the machinery.

    Thanks,

    Doug Danielson
    Atlanta, GA




    rfq: reel to reel etching capability






    , sci.electronics.equipment,sci.electronics.components,sci.electronics.cad
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-