Connect with us

RFID and Zigbee Interfacing

Discussion in 'Radio and Wireless' started by hamzahsa, Jan 18, 2014.

  1. hamzahsa

    hamzahsa

    1
    0
    Jan 18, 2014
    What would be the best way to interface an RFID module (we are using the EM-18 module) so that it transmits the tag info through a Zigbee network (we are using the Tarang F4 modules which are similar to the old Digibee modules)?

    Would it be better to use a microcontroller in between as an interface between the two? Or directly connect the EM-18 out into the F4 in and then transmit it too? But the zigbee should transmit some sort of unique identification for itself too, so that we know which node we are receiving from
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-