Maker Pro
Maker Pro

RF Walkie talkie chip selection

santichuit

Dec 11, 2013
2
Joined
Dec 11, 2013
Messages
2
Hi All,

I'm close to my EE. BSc finale and I'm looking to play around a little bit with the stuff I've learned. To be honest, I'm a little bit upset that afer 4 years of learning communications theory, I'm not able to choose the HW I need.

My idea is to reach a half duplex walkie talkie with the following reqs:

-Low voltage operation. Till 5V.
-Range about 1.5 km LOS
-ISM frequency use ( I preffer 433 MHZ UHF bands )
-Single chip that doesn't require extra elements as crystal or filters

The idea is to intstall 2 walkie talkies, one on each house. House are about 900m range. One has a direct window outside while the other is an interior office.

The application is for voice only. Cosidering the FM advantages I'll prefer it, but if there is a big difference of value then AM could be an option.

The chip I'm looking for must be smallest that can be.

I've seen many chips ( as the following links ) but I'm not sure that their digitals buffers support voice applications..

http://www.hoperf.com/rf_fsk/fsk/21.htm
http://www.melexis.com/Wireless-Multi-Market--Sensing/RFIC-Transceivers-27-to-950MHz/TH7122-121.aspx
http://www.silabs.com/products/audio/fmtransceivers/Pages/default.aspx

Thanks !
 

KJ6EAD

Aug 13, 2011
1,114
Joined
Aug 13, 2011
Messages
1,114
Try searching for a complete UHF transceiver module.
 
Top