Connect with us

RF Commander III

Discussion in 'Security Alarms' started by Julian Vivaldi, Apr 17, 2004.

Scroll to continue with content
  1. I have setup the entire system, everything seems fine. The front door is
    sensor 04, motion is 12.
    When i arm it in away, and i go to the front door and open it the siren goes
    off immediately. I have the exit time at 48 seconds.

    Any ideas or suggestions?
     
  2. Jim Rojas

    Jim Rojas Guest

    Entry Delay POLICE + POLICE + STATUS + (8 to 88) seconds
    Exit Delay POLICE + POLICE + BYPASS + (8 to 88) seconds

    Jim Rojas
     
  3. I did that Jim. I got entry time set to 32
    and exit set to 48 since everything has to be divisible by 8.

    That was the first thing i checked.
     
  4. Jim Rojas

    Jim Rojas Guest

    Then try deleting the sensor and relearning it. Zone 04 is delay by default.

    Jim Rojas
     
  5. Mark Leuck

    Mark Leuck Guest

    Wrong programming, it sounds like he has a Commander III not a RF Commander
    17, the III is a completely different animal with sub fields, he'd have to
    go to subfield 1 section 1 and 2 for the delay fields

    No wireless on that one
     
  6. Jim Rojas

    Jim Rojas Guest

    That explains alot... :)

    Jim Rojas

     
  7. Mark Leuck

    Mark Leuck Guest

    Network Security put in a ton of them around here, I had one in my old
    apartment, not compatible with any other station that I know of
     
  8. Jim Rojas

    Jim Rojas Guest

    According to ITI, there is no such thing as a Commander III. It's just a
    Commander. the III is some kind of decoration. So I was told... :)

    Jim Rojas
     
  9. Mark Leuck

    Mark Leuck Guest

    They are wrong, I have the user and installation manual, my guess is they
    told you that because proprietary panels like that aren't handled by tech
    support.
     
  10. Its a complete wireless system. I downloaded the installation manual right
    frmo GE and the main section says RF COMMANDER III and the manual just says
    RF COMMANDER. When i reprogrammed the system I followed this manual, and
    everything works fine except the entry and exit delays.
     
  11. shark_bite

    shark_bite Guest

    Can you please point me to where on GE site I can download that
    manual?
    I've been looking on the web for a while and can't find it anywhere.
    Or if you be so kind and email me a copy of it? :)


    I've been trying to get the system to work at my place. I have the
    owners manual and i know the codes I just need to know how to program
    more zones.
    Would be greatly appreciated.
    Thanks.
    Art.
     
  12. Terry

    Terry Guest

    Jim,

    I told you that a long time ago... they are racing stripes !! they
    make the radio signals get to the panel faster so that they OUT RUN
    PAUL AND HIS RFI.



    Terry
     
  13. Terry

    Terry Guest

    Mark... I have Commanders (hardwire 4 zone) and RF Commanders
    (wireless 16 & 8 zone) in stock and they all have the DECORATION
    STRIPES.

    Terry
     
  14. Jim Rojas

    Jim Rojas Guest

    Yep...that explains everything now... :)

    Jim Rojas
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-