Connect with us

Reusing an LCD viewfinder from old camcorder

Discussion in 'LEDs and Optoelectronics' started by Tzvyl, Nov 4, 2018.

  1. Tzvyl

    Tzvyl

    1
    0
    Nov 4, 2018
    Hi

    I have a Panasonic camcorder model :nv-rx33, still working.
    The viewfinder works perfectly.
    The viewfinder has a Sony CXA1854AR IC.
    The LCD model is Sony LCX005BKB8.

    The viewfinder is connected to the camera by a 7 wire connector.
    Wires 6 and 7 are for the back light , the rest are for the video signals ,the lcd power and so on.
    I have the LCD's data sheet, also the viewfinder datasheet.
    I'm only an amateur ,so it doesn't help me a lot. but I can provide it to anyone who would like to help.
    I would like to use the viewfinder independently, either as a monitor to a Raspberry Pi or to make a small video projector.
    I'm attaching some photos.
    Can someone help me please.
    Thanks ahead.
    Tzvyl
     

    Attached Files:

Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads
There are no similar threads yet.
Loading...
Electronics Point Logo
Continue to site
Quote of the day

-