Maker Pro
Maker Pro

Resistor value

G

Gotoguy

Jan 1, 1970
0
Hi, I'm working on a Insignia plasma, NS-42P650A11, no power, clicking, no pic,....no voltage coming out pins from data ribbon to other panels, so further testing revealed a resistor reading 000.0- 000.3 ohms.....shorted? or used as a jumper..? its a ceramic type 1/8 thick 1/2 insq, reading on top says 5w R017J...?..anybody have any ideas what the value is...? thanks...
 
U

Uffe Bærentsen

Jan 1, 1970
0
Den 23-10-2013 17:08, Gotoguy skrev:
Hi, I'm working on a Insignia plasma, NS-42P650A11, no power, clicking, no pic,....no voltage coming out pins from data ribbon to other panels, so further testing revealed a resistor reading 000.0- 000.3 ohms.....shorted? or used as a jumper..? its a ceramic type 1/8 thick 1/2 insq, reading on top says 5w R017J...?..anybody have any ideas what the value is...? thanks...

0.017 Ohm
 
Top