Maker Pro
Maker Pro

Requirement of a 3-D vertically stacking RGB LED

geekay19

Feb 27, 2021
3
Joined
Feb 27, 2021
Messages
3
Hi All,

I am doing an experiment on the LEDs. I am looking for a 3-D vertically stacking RGB LED, which basically can display colors. The LED should be able to take in a minimum of 200mA current. what would be the best possible 3D stacking LED or 3D flip-chip that I can use for this? Please let me know.

PFA for the link, refer Fig 1.C https://www.mdpi.com/1996-1944/11/3/365/htm

htm
 
Top