Connect with us

Replacing touchscreen on exercise bike console

Discussion in 'Troubleshooting and Repair' started by Runcorn, Jun 15, 2020.

Scroll to continue with content
  1. Runcorn

    Runcorn

    1
    0
    Jun 15, 2020
    Hi
    I have a Proform TDF 2.0 exercise bike, about 5 years old with an unresponsive touchscreen. It has been slowly failing over last few months, not always responding to presses, calibration going off etc. Rest of bike functions fine - can I simply replace the touchscreen? Is this realistic for a competent person who sadly knows nothing about electronics? Thanks for any advice.
     
  2. Bluejets

    Bluejets

    5,620
    1,190
    Oct 5, 2014
    I would imagine it to be an oem device.
    Replacement with the same unit may or may not be complex for such as yourself.
    Difficult to say as it depends on the unit and your level of adaptability to new situations.
    Thing is, it may be other interface devices at fault or failing.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-