Connect with us

Replacing ch-dvd 500 resistors

Discussion in 'Troubleshooting and Repair' started by martind1, Nov 8, 2010.

Scroll to continue with content
  1. martind1


    Nov 8, 2010
    I have blown some resistors in my ch-dvd 500. Unfortunately I'm not sure what type of resistors I need to replace as the explosions/burn took away the distinguishing marks.

    Can anyone help with either a diagram or a photo of a working unit?

    The board in question is the one with the Power Supply.

    If there is somewhere I can buy a whole new board, that is probably even better!
  2. (*steve*)

    (*steve*) ¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd Moderator

    Jan 21, 2010
    Perhaps you can start with a photo of your dead one.
  3. martind1


    Nov 8, 2010
    Yes I will have to take one tonight and attach it.

    I was hoping for a quick fix though!
  4. martind1


    Nov 8, 2010
    Here is the image of the board that I either need to replace entirely or replace the resistors on.

    Like I said you can't really tell what they were since they are so scorched.

    Attached Files:

Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day