Maker Pro
Maker Pro

Replacement for 74HC14

MrWho

Dec 16, 2011
9
Joined
Dec 16, 2011
Messages
9
Hello,

Could please somone help me can I replace the 74HC14 with any of those:


74HC14-2 CMOS HS HEX SCHMITT TRIGGER N/A
74HC14D-PHIL CMOS HS HEX SCHMITT TRIGGER 14P SMT 57PCS/TUBE .65ES SOGENT Philips Electronics
4HC14D-PHIL3 CMOS HS HEX SCHMITT **SMT T/R Philips Electronics
74HC14N-PHIL1 CMOS HS HEX SCHMITT TRIGGER Philips Electronics
74HC14PW-PHIL CMOS HS HEX SCHMITT TRIG TSSOP14 SMT T/R Philips Electronics

Thank you very much :)
 

Attachments

  • b.jpeg
    b.jpeg
    71 KB · Views: 319

(*steve*)

¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd
Moderator
Jan 21, 2010
25,510
Joined
Jan 21, 2010
Messages
25,510
Those are *all* 74HC14's, so any is OK.

You'll find that some are easier to work with than others however. TSSOP is a package that has very closely spaced pins. You probably need to look for a 74HC14 in a DIL (or PDIP) package.

You'll find that the part mumber will typically include "74HC14" with prefixes and/or suffixes. The prefix normally designates the manufacturer, and the suffix things like physical package, and other electrical characteristics.
 

MrWho

Dec 16, 2011
9
Joined
Dec 16, 2011
Messages
9
Those are *all* 74HC14's, so any is OK.

You'll find that some are easier to work with than others however. TSSOP is a package that has very closely spaced pins. You probably need to look for a 74HC14 in a DIL (or PDIP) package.

You'll find that the part mumber will typically include "74HC14" with prefixes and/or suffixes. The prefix normally designates the manufacturer, and the suffix things like physical package, and other electrical characteristics.

Thank you very much !
 
Top