Connect with us

Replacement Commutator Problem - Solved

Discussion in 'Electronic Design' started by Mccs4, Aug 25, 2004.

Scroll to continue with content
  1. Mccs4

    Mccs4 Guest

    First, thanks to all who responded to my post. We solved the problem by
    increasing the size and depth of the slots between the silver bars. The
    brushes must have been shorting out the bars, as was suggested on this list.

    Thanks again.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-