Connect with us

Repairing Lincoln Plasma Cutter inverter board...

Discussion in 'Troubleshooting and Repair' started by fics, Dec 13, 2015.

Scroll to continue with content
  1. fics

    fics

    1
    0
    Dec 13, 2015
    I'm going to try fixing the inverter board for a Lincoln ProCut 25 plasma cutter...I found the problem, the transformer lead at the board is broken...(guess the factory installed tie wrap didn't hold it securely) but I can't find the part....I need help...much appreciated:) 100_4707.JPG
     
  2. dorke

    dorke

    2,342
    665
    Jun 20, 2015
    Try here.
    It is either you get an original transformer
    or if possible try to re-solder the broken end .

    Can you please post a photo so we can evaluate the soldering option?
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-