Connect with us

Repair RFU Adapter?

Discussion in 'Electronic Repair' started by [email protected], Jun 18, 2007.

Scroll to continue with content
  1. Guest

    I've got two old RFU adapters that are compatible with N64/Gamecube
    consoles... Both work, but one was missing the pin that actually
    connects into the back of the television's analog input jack. The
    other had a damaged head and I could not plug it into the analog input
    jack either.

    On one, I sheared off the rubber and smaller copper wires, exposing
    the main copper wire beneath. I'm a complete novice with this kind of
    thing, but after no luck attempting to plug the copper wire directly
    into the analog input jack, I assume the smaller copper wires are
    actually needed.

    At this point, both have the heads removed from the cable.

    Any suggestions on this?
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-