Connect with us

remove CRT monitor cover?

Discussion in 'Electronic Repair' started by George, Feb 21, 2013.

Scroll to continue with content
  1. George

    George Guest

    I have two Dell E770s monitors. One has a less-than-crisp display, the
    other just had what sounded like a capacitor flameout. It still works,
    but I don't exactly trust it. I'd like to cannibalize these two, to get
    one working unit.

    The monitor cover seems to be mostly snapped on. I found two screws in
    the lower front, and what looks like some sort of latch releases in the
    same area. I don't see how these operate, and I kind of doubt they'll
    release the whole thing anyway.

    Any clues about how to proceed would be appreciated.

  2. gregz

    gregz Guest

    Carefully go over it delicately, then build up more aggression. Not
    familiar with specific model. Get different sized screwdrivers !!

  3. Franc Zabkar

    Franc Zabkar Guest

  4. George

    George Guest

  5. micky

    micky Guest

    Yes, the way it's done. It's the same thing I had to do to get my
    4-year old away from his cookies.
  6. Leif Neland

    Leif Neland Guest

    micky kom med følgende:
    The prying or the shaking?

Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day