Connect with us

Remote USB, TF, AD keys, IR sensor

Discussion in 'Sensors and Actuators' started by Saittao, Nov 26, 2017.

Scroll to continue with content
  1. Saittao


    Nov 26, 2017
    Hey this may be a dumb question but hell why not better safe then sorry lol. I have a set of 5.1 Logitech surround speakers, and I found a Bluetooth module from ebay its just the common one for 5 bucks with USB headphone jack and sd card slot. I want to install it inside the sub and run remote wires for the USB, TF, IR, and AD keys up to the main speaker. its a nice system and I want to add all this to the main speaker very cleanly and professional looking also adding basic plug connectors to the board so If I have replace the board its easy job with lite soldering. Anyways My question is do you think 30 gauge wire will be ok for this or should I use larger wire? Also maybe Im doing this the hard way if there is any better ideas please feel free to help me out with a better idea lol. Thanks in advance.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day