Connect with us

Remote Readout Digital Meters

Discussion in 'Electronic Design' started by Michael Karas, May 9, 2010.

Scroll to continue with content
  1. Not sure about those. But I have an old Tenma DMM that works well.
    They've been around awhile. Their new DMMs with rs232 are optical.
    Here's a less expensive one..
    <http://www.mcmconnect.com/tenma/product/72-7735/Handheld DMM's>
    But for $80 you can get a RMS one.
    Heres a selection chart
    <http://www.mcmconnect.com/tenma/products/dmm_guide.jsp>

    Cheers
     
  2. When it comes to meters, you almost always get what you pay for.
    I'm currently in the process of reviewing ten low cost meters, but not
    either of those unfortunatetly.
    Out of those two I'd go for the Uni-T, at least it's a known brand.

    Dave.
     
  3. Nico Coesel

    Nico Coesel Guest

    Any 4.5 digit meters?
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-