Connect with us


Discussion in 'Electronic Design' started by aditya87, Feb 23, 2008.

Scroll to continue with content
  1. aditya87

    aditya87 Guest

    Hey, i'm designing a interface board which has to select analog beam
    signals. there are 3 ports carrying these signals...and i'm planning
    to use relays to switch between these signal lines. What kind of
    relays would I need for this purpose?The voltage range would be 160Vpp
  2. Hot Jock

    Hot Jock Guest

Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads
Electronics Point Logo
Continue to site
Quote of the day