Hello
I am trying to interface following relay with microcontroller but It's not working. So I decided to interface manually with 5V DC power supply.
I have connected the 24v DC load at the output of relay But It's not working
Relay pins
3-- 5V DC
4-- GND
1--- 24 DC
2 --- GND
Relay
https://www.unisoncontrols.com/pcb-mounted-relay/704-pcb-mounted/mosfet-dc-to-dc/
Load
http://www.shavison.com/pdf/G3000.pdf#page=2
I am trying to interface following relay with microcontroller but It's not working. So I decided to interface manually with 5V DC power supply.
I have connected the 24v DC load at the output of relay But It's not working
Relay pins
3-- 5V DC
4-- GND
1--- 24 DC
2 --- GND
Relay
https://www.unisoncontrols.com/pcb-mounted-relay/704-pcb-mounted/mosfet-dc-to-dc/
Load
http://www.shavison.com/pdf/G3000.pdf#page=2