Relay Control Bia Parallel Port

[Nelly]

Hi
is there any good software that runs on win. xp that will allow me to turn
on and off pins on a parallel cable individual so they are high and low?

thanks

 

[D MARSHALL]

goto -
www.geocities.com/lalimparallal/index.html
and download the basic version freeware.

john

 

[Nelly]

hi

thanks alot john

nathan

goto -
www.geocities.com/lalimparallal/index.html
and download the basic version freeware.

john

 

[Nelly]

hi

thanks alot john but the site is geocities.com/lalimparallel/


nathan

 

[D MARSHALL]

is that exactly what you wanted?

theres also turbo-c v-basic if like to
write a program of your owen.

john

 

[Nelly]

hi thats what i wanted but i did have an io card but never the less thats
what i wanted , basically it allows me to turn each one on and off
thanks alot
Nathan

 

[Nelly]

hi
i plugged it up to my io card but some of the ports on the program turn
yellow and some dont what does that mean?

 

[Guest]

http://www.ozitronics.com/index.html

 

[Nelly]

thanks

 

[Ed Pinder]

I am using software from this link, it is a try before you buy, the trial
accesses all 8 lines, the paid version also lets you access another 2 groups
of 8 lines, as well as inputs. http://www.hottimesoftware.com/

Hope this helps.

Ed

 

[Nathan]

Hi there
i will try the demo out
thanks alot

I am using software from this link, it is a try before you buy, the trial
accesses all 8 lines, the paid version also lets you access another 2
groups of 8 lines, as well as inputs. http://www.hottimesoftware.com/

Hope this helps.

Ed