Connect with us

Relay basics please
Reply to Thread

Discussion in 'General Electronics' started by Dope mcSmoke, Jan 30, 2004.

  1. Jan 30, 2004 #1
    Dope mcSmoke

    Dope mcSmoke Guest

    I want to use a simple pushbutton and a relay to form a DPDT switch (as in
    guitar stompboxes). Suppose a "latch" relay would do it... I assume the
    pushbutton is the actual "push" that moves the relay to the second state and
    back? Should the the button break the current or open it?

    Thanx
     
  2. Jan 30, 2004 #2
    JeffM

    JeffM Guest

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. basics

  2. capacitor basics

  3. Breadboard basics

  4. VCO basics

  5. Desoldering basics

  6. Resonance Basics

  7. ** Learning PCB Design & Layout - Please Help with Basics **

  8. FET basics

Loading...
Electronics Point Logo
Continue to site
Quote of the day

“”

-