Connect with us

red led in smd module
Reply to Thread

Discussion in 'LEDs and Optoelectronics' started by ali_aam, Aug 3, 2017.

  1. Aug 3, 2017 #1
    ali_aam

    ali_aam

    1
    0
    Aug 3, 2017
    in each of smd module 3 led and resistor are series.
    after 2 or 3 days one of leds turn off but tow other leds remains bright.
    can any one explain this video's and picture.
    [​IMG]





     
  2. Aug 4, 2017 #2
    (*steve*)

    (*steve*) ¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd Moderator

    25,149
    2,667
    Jan 21, 2010
    Maybe you've destroyed some of the LEDs.

    These don't already to be addressable LEDs, so I'll ignore that as a possibility.

    When you have killed, or nearly killed, a LED then you often find they either don't come on immediately, it require a higher current to turn on, or are unusually dim.

    Since semiconductors tends to fail short circuit, failures tend to cascade.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. LED display module

  2. Black patch (spot) in center of red led light

  3. Alternate LED Module Power

  4. Red Green Led 2 Leg

  5. Luminousity of standard RED LED

  6. Making a bicolor LED blink red/green

  7. High Power SMD LED Array - Heatsinking

  8. led/smd rear/tail lighting board problem

Loading...
Electronics Point Logo
Continue to site
Quote of the day

“”

-