Maker Pro
Maker Pro

Recommend Quad Op Amp 50ma/ch

J

James Hardy

Jan 1, 1970
0
Can anyone recommend a quad op amp in DIP that will run off a 3-6V
single supply and output at least 50ma per channel?

Prefer low power with rail-to--rail output if possible. The signal s
ar in the vicinity of 100Hz (sinewaves), so there are no other
critical specs that come to mind.

Thank you,

James Hardy
 
Can anyone recommend a quad op amp in DIP that will run off a 3-6V
single supply and output at least 50ma per channel?

Watch the power dissipation.
Prefer low power with rail-to--rail output if possible. The signal s
ar in the vicinity of 100Hz (sinewaves), so there are no other
critical specs that come to mind.

Take a look at the Intersil EL5420T (the 'T' is significant).

http://www.intersil.com/products/deviceinfo.asp?pn=EL5420T
 
N

Nico Coesel

Jan 1, 1970
0
Can anyone recommend a quad op amp in DIP that will run off a 3-6V
single supply and output at least 50ma per channel?

Prefer low power with rail-to--rail output if possible. The signal s
ar in the vicinity of 100Hz (sinewaves), so there are no other
critical specs that come to mind.

TS925 from ST. But watch the input bias current of this opamp!
 
Top