Connect with us

recomended lowish volume flyback vendor

Discussion in 'Electronic Design' started by Hawker, Apr 25, 2007.

Scroll to continue with content
  1. Hawker

    Hawker Guest

    Does anyone have a vendor they like working with that works NRE +
    production cost for low volume SMPS flyback topology transformers.

    I need an EP-13 size transformer designed and produced for an NCP-1012
    5w dual output design. My client is low volume at around 200 per year.
    All the folks I currently use are better set up for 1,000-20,000 EAU and
    not a good choice for this low a volume.

    I have little experience at these low volumes so could use some advice.

    Thanx
    Hawker
     
  2. John Larkin

    John Larkin Guest


    http://www.minntronix.com/content/pages/default.asp

    Talk to Butch.

    or

    http://www.precision-inc.com/

    Alan Kamann is the designer here.

    Both do good work in modest quantities.

    John
     
  3. Hawker

    Hawker Guest

    Thanx I'll check with both of them in the morning.
    I wish I knew about Minntronix. Pretty cool that they have off the shelf
    TopSwitch GX and TinySwitch parts. I wish I knew about that a few
    months ago. I wonder if there prices are as good as XFMRS Inc?

    Hawker
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-