Connect with us

RCM 3000 Rabbit Module Test fixture

Discussion in 'Microcontrollers, Programming and IoT' started by auriuman78, Oct 11, 2012.

  1. auriuman78

    auriuman78

    6
    0
    Oct 11, 2012
    Hi,
    I work with rabbit 3000 modules (AT56C55-UL2T processor/RTL8019AS comm) on a daily basis and I need a better way than I currently have to test them. I'm placing it in programming because I'll need advice in this area to build a test fixture. Currently I place them in operational configuration to test them but this requires 10 - 15 minutes per rabbit module. This is a lot of time. All suggestions are welcome. Thanks.
     
    Last edited: Oct 11, 2012
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-