Connect with us

RCD snubber circuit design

Discussion in 'Electronic Basics' started by powertec, Sep 20, 2013.

Scroll to continue with content
  1. powertec

    powertec Guest

    Snubber circuits are commonly used in switching converters like flyback etc.
    There are a variety of types used, one of these is the RCD turn off snubber. This snubber controls the rate of voltage rise at turn off and thus reduces the switch losses. For more detailed analysis and simulation example see the link below.
    There is also an online design calculator that helps design and validate the RCD snubber circuit.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day