Maker Pro
Maker Pro

RCA XL100/Skip Commercial Model F25261/Chassis CTC185AA4 has no sound...

B

braincambre500

Jan 1, 1970
0
Hello all,

I am an electronics hobbiest...and like to pursue challenges!

I accidently put a 5+vdc power surge on my two speaker wires inside th
TV set. Since then, I have had no sound on the TV, but everything els
is OK.

I am sure I messed up the audio section somehow...but do not know wher
to start. My 33 ohm/2 watt resistor is OK in the audio section...bu
that is all I see (visually) that could of been messed up.

I would sure appreciate replies concerning my challenge. I have an 0h
Meter/desoldering gun/and tools to do the job...but do not know wher
the culprit is lurking.

Any help would very much be commended.

I thank each and everyone for taking the time to read my post!

Sincerely,

Patrick C. Cambr
 
A

Art

Jan 1, 1970
0
Sounds like the USB Speaker Connection may have been defective when the Flux
Capacitor discharged,Eh?? <
 
Top