Connect with us

RCA TV Troubleshoot

Discussion in 'Electronic Repair' started by [email protected], Nov 23, 2006.

Scroll to continue with content
  1. Guest

    I have a RCA TV and last nigth i switched it off and was working fine.
    Today morning when i am trying to switch it on, its not turning on.
    Please anyone can give me some tips to troubleshoot or to look out for
    some components in TV. Any help is appreciated.

  2. Without some knowledge and experience, do not try to fix your TV on your

    Sorry, but there are safety issues and others as well.
  3. Radiosrfun

    Radiosrfun Guest

    This "may" sound like a dumb question, but are you sure the thing is still
    plugged in? Maybe the plug vibrated out of the outlet over time, a child,
    cat or dog pulled it out walking/running past it, etc? You'd be surprised
    how often that is "over looked". IF it "is" plugged in, check that outlet
    with a lamp or some other AC operated apparatus to see if you have energy
    going to it. Maybe you have a blown fuse. IF the outlet is working ok - then
    as Mr. Schuler suggested, do not fool with it, if you have no experience.

  4. Meat Plow

    Meat Plow Guest

    From RCA Tech Support:

    Make sure the set is plugged in.
  5. buffalobill

    buffalobill Guest

    i don't know, but have had success on unplugging a dead tv after a
    power surge and have it miraculously come back to life upon plugging it
    in the next day.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day