Connect with us

rca r52wm24 convergence problems

Discussion in 'Troubleshooting and Repair' started by aukenii, Nov 7, 2009.

Scroll to continue with content
  1. aukenii


    Oct 19, 2009
    I have a 52" rca rear projection tv.Ive been all over the net trying to figure out how to fix a warped screen with bad convergence. This tv has the itc222 chassis.I bought a convergence kit with a fuse and three capacitors as suggested and it didn't work I re soldered the flyback and any other suspicious solders Didn't work. I was told it could be the convergence ic's but this chassis doesn't use them.
    I am at a loss.Doe's anyone have any suggestions on what this problem could be?
    Last edited: Nov 7, 2009
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day