Connect with us

RCA P60928 blows fuse

Discussion in 'Electronic Repair' started by [email protected], Oct 28, 2012.

Scroll to continue with content
  1. Guest

    My rca just died.Chassis is a PTK195nt I disconected the lead to the
    high voltage spliter and the focus lead it blows the fuse when I hook
    up the ground to the hv spliter. Does this without turning the set on
    just blows as soon as you plug it in. HOT test ok. Any help would be
    great. Thanks Ted
  2. Guest

    Found the problem with help from an earlier post from here. It was the
    v regulator on the power supply for the convergence board. Ted
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day