Connect with us

RCA P46924 cycles off and on automatically

Discussion in 'Electronic Repair' started by AFBear, Feb 18, 2006.

Scroll to continue with content
  1. AFBear

    AFBear Guest

    I have a 2002 RCA P46924, chassis CTC195M26A. Last fall it stopped
    working and I had to replace the flybact and the HOT. I finally got
    around to doing it and now it looks great but it intermitently turns
    off (both audio and video) and on within 1-2 seconds. Sometimes it
    will try and come back on but turn off again. If it does this three
    times in a row it will stay off until I power it on.
     
  2. JANA

    JANA Guest

    Did you try looking for cold solder connections to start with?

    Anything that is going open or short can cause a set to turn off. You would
    have to troubleshoot the set during the fault condition to see where the
    failure is. Start with investigating the power supply, protection circuits,
    and then on to the scan circuits.

    --

    JANA
    _____


    I have a 2002 RCA P46924, chassis CTC195M26A. Last fall it stopped
    working and I had to replace the flybact and the HOT. I finally got
    around to doing it and now it looks great but it intermitently turns
    off (both audio and video) and on within 1-2 seconds. Sometimes it
    will try and come back on but turn off again. If it does this three
    times in a row it will stay off until I power it on.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-