Connect with us

RCA chassis ATC010A

Discussion in 'Electronic Repair' started by Gary Woodruff, Jun 3, 2010.

Scroll to continue with content
  1. Hello, I have an RCA chassis # ATC010A. The set will power up and
    display a pic for about 5 seconds before turning off. I can hold any
    front panel button (vol, channel, etc) and the set will stay powered on
    until the button is released. I know these sets have problems with the
    front panel assembly being defective and causing on/off by itself
    problems. I tried powering on set and disconnecting the cable to the
    front panel button assembly but the set still powers off after a 5
    seconds of picture. I have also checked for cold solder joints and
    replaced the HOT. Anyone have any suggestions or a print?

    Thanks, Gary
     
  2. Franc Zabkar

    Franc Zabkar Guest

  3. catpandaddy

    catpandaddy Guest

    I ONCE HAD A DICK IN MY MOUTH AND I THOUGHT IT TASTED LIKE HEAVEN.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-