D
Dani
- Jan 1, 1970
- 0
Model # F36650YX01 ATC113CA1, dead, 2SC5148 shorted, & 257805
flyback bad...NLA. Used a 257805-REP Generic, works fine, after 5
minutes,
blows the output again, but had a perfect pix. The horizontal has been
soldered,
& B+ was ok. Also, with these sets, after this repair, I see a couple
of vertiacal
scan lines on top of the pix as you change channels. Ideas? Dani.
flyback bad...NLA. Used a 257805-REP Generic, works fine, after 5
minutes,
blows the output again, but had a perfect pix. The horizontal has been
soldered,
& B+ was ok. Also, with these sets, after this repair, I see a couple
of vertiacal
scan lines on top of the pix as you change channels. Ideas? Dani.